Professional Mini Airbrush Compressor Kit with 0.4mm 2cc Dual Action Spray Gun Airbrush for Beauty Makeup, Temporary Tattoos,Crafts, Nail Art, Cake Decoration, Spray Model

●1.More smaller mini air compressor,which is specially suitable for artists and students who do some artistic creation

●2.Adjustable pressure: It has 3 adjustable pressure:Low,Medium,High pressure ,which will meet any of your needs.

●3.Steady out fluid makes it will be a good choice for airbrush makeup,airbrush nail

●4.Beautiful design. the overall sense give you a strong sense of science and technology, feel very comfortable, whether you are a beginner or skilled, are very applicable.

Product Description

Description of Compressor:

Air hose: 1.8m

Voltage: 12V DC

Adapter: 100v-240v

Sound: Light, vibration free

Suitable for：0.2-0.5mm Airbrush

Time: Designed for extended running and use

Air flow: 11,12,13 L/min (3 stage available)

Max pressure: 25PSI

Working style: AUTO START & OFF

Available Colour: PINK

Description of Airbrush Kit:

Nozzle Diameter :0.4mm

Fluid Cup Capacity : 2cc

Operating Pressure : 15-30PSI

Switch Mode : Dual-Action Trigger Control

Paint Distance : 50-100mm

Weight :280g/9.87oz

Color:PINK

Package Includes:

1x Manual

1x Wrench

1x Air Brush

1x Air Hose

1x AC Adapter

1x Min air Filter

1x 2cc Eye Dropper

1 X Airbrush Holder

1x Air Mini Compressor

1x Golden colour nozzle tool

1x Instruction for Air Brush

1x Instruction for Compressor

FAQ

1.Question: Water trap doesn't hold air anymore, what gives?

Answer: Not exactly sure what you mean by “doesn’t hold air” so I will assume you mean that the bowl leaks air whenever air pressure is applied to the inlet. The unit I have purchased has worked flawlessly but previous units I have used have occasionally developed leaks. In general there could be four reasons fir this. [1] The plastic bowl could be broken & would need to be replaced. [2] the bowl is loose & needs to be hand tightened by gripping it with your fingers & turning it clockwise into the base. [3] The bowl O-ring is missing, damaged or out of position. Unscrew the bowl & remove it from the base. An O-ring should come out with it. Make sure it is not cut or damaged. Carefully place it on the rim of the bowl & replace the bowl & ring together in the base. A tiny dab of Vaseline on the O.ring will help it seat properly. Finally [4], dirt can get into the seat of the spring loaded drain valve on the bottom of the bowl. Push the pin a few times with the valve with full air pressure applied to clear any dirt that might be keeping the valve from seating. Hope this helps.

2.Question: What is the maximum inlet pressure?

Answer: I found that the best psi is between 30 to 35 psi and that’s for me. It may range depending on what your doing and type of airbrush. But you do not want to exceed over 45 psi

3.Question: The answers for maximum inlet side pressure is unclear. i have a 200 psi compressor, will this regulate safely reduce 200 psi to 20-40 psi?

Answer: 200 psi geez that's a lot. You might run a bigger more heavy duty reg first down to 60-70 psi if your compressor doesnt have one on it. Its kinda how i have my setup for airbrushing. This one is bolted to my table next to me.

Hot Tags: piston airbrush compressor with airbrush kit（ac19wk/ac19rk）, China, suppliers, manufacturers, factory