Gravity Feed Airbrush,Push-and-Pull Trigger | Professional Airbrush For Face, Body & Fine Detail Work | Includes Storage Case

Model: MJ-126

· Designed for detail; perfect for work on horizontal surfaces by fine artists, illustrators, and cake decorators; dual action internal mix.

· Will spray properly reduced acrylics and pre-reduced materials such as inks, dyes, water colors, airbrush-ready paints such as Air-Opaque, SpectraTex, Model Flex

· Self-lubricating PTFE needle bearing enables continuous proper paint flow and prevents needle wear; Non-slip, one-piece trigger; PTFE head seal assures efficient air flow; Winged back lever design for easy reassembly and smooth trigger control

How to clean:

1. Add water, alcohol or cleaning fluid to the fluid cup and spray it.

2. Try back flushing. Cover the nozzle with finger or a paper towel and press down slightly on the trigger. This helps clean the narrow chamber around the needle.

Please Note:

1. Please test the airbrush with water before use to make sure the airbrush is not clogged.

2. When finishing the spraying work or have to stop for more than 10 minutes, please use the cleaning brush to clean the airbrush cavity, nozzle, and fluid cup thoroughly in time.

3. After 30 minutes of continuous use, the air compressor should be turned off for a few minutes to cool down.

4. Don't soak your airbrush. Even though it might sound like a simple cleaning solution, doing so will actually damage the more sensitive parts of the tool.

5. Please use water-based makeup foundations instead of oil-based makeup foundations, you need to use makeup foundations made for airbrushes otherwise it will clog the nozzle.

6. Please do not use the airbrush when charging.

7. If the trigger starts to feel sticky, use one of the special lubricants that are specifically designed for airbrushes.

8. If the airbrush can't spray liquid, it may be because the fluid control knob is too tight or the nozzle is blocked. Please try to adjust the fluid control knob or clean the nozzle with alcohol or detergent.

Hot Tags: 0.3mm single-action airbrush (mj-126), China, suppliers, manufacturers, factory